excavator bucket

Material：high quality 40cr steel round bar is the raw material of our excavator tooth pin. Surface: Various surface treatment for our excavator tooth pin like blackening,galvanied... Products: Complete product system of all kinds of excavator tooth pins. We can manufact all the tooth pins you need.

The bucket tooth adapter structure is mainly composed of three parts, the head, the upper leg and the lower leg. The head cooperates with the inner cavity of the bucket tooth sleeve to become the mounting seat of the bucket tooth sleeve. The front ends of the upper and lower legs are both connected with the rear end of the head.

Our Cat bucket teeth adapters were made by advanced forging technology, independently develop custom forged special steel, improve its internal structure and mechanical properties through precision forging, and unique heat treatment process, the product has high strength, high wear resistance, fatigue resistance, and product life. Extends several times, thereby reducing maintenance time and construction costs. The wear-resistant cat bucket teeth adapters and the preparation method thereof solve the problems of general mechanical properties, short service life and high production cost of the existing tooth seat. The composition and mass percentage of the wear-resistant tooth seat of the present invention are: C: 0.22-0.25%, Mn: 0.90-1.30%, Si: 1.30-1.70%, Cr: 1.20-1.50%, Al: 0.02-0.06%, Ni: 0.15 to 0.20%, Mo: 0.10 to 0.15%, and the balance is Fe and inevitable impurities.

Our company has been selling Kubota excavator bucket teeth for many years and has accumulated rich experience in the long-term market. Our Kubota bucket teeth are available in a variety of quality levels. And our sales will recommend to you the most economical choice according to your application scenario. Make your excavator more efficient.

Cat excavator teeth replacement cycle： The replacement cycle of the cat excavator teeth should be determined according to the construction environment and the degree of wear of the bucket teeth. For example, the excavator has been doing earthwork work, so the wear degree of the cat excavator teeth is relatively small, and it is generally replaced every 4-5 months. . If it is a rock-type cat excavator teeth, the frequency of replacing the bucket teeth is faster. Like granite, it takes about a week to replace the bucket teeth. Of course, this cycle is not fixed, and it depends on the quality of the bucket teeth and the meticulousness of the actual operation. and so on to determine the replacement frequency of bucket teeth.

Buying Guide of komatsu pc200 bucket teeth： If your excavator is doing earthwork, the frequency and demand for replacing komatsu pc200 bucket teeth every year is relatively small, then it is recommended that you choose forging and casting komatsu pc200 bucket teeth, although the price is much higher, but the service life, production process and quality are all is optimal. If the requirement for the number of bucket teeth is relatively large, then the cost performance of the komatsu pc200 bucket teeth is required to be relatively high, then the precision cast bucket teeth perform well in terms of price, quality, cost performance and wear resistance.

1. During the use of the komatsu bucket teeth of the excavator, the outermost teeth of the bucket wear 30% faster than the innermost teeth. After a period of use, the inner and outer komatsu bucket teeth of the bucket should be replaced. 2. The excavator driver should pay attention to the angle of digging during the operation, try to master it when digging, and the komatsu bucket teeth are perpendicular to the working face when digging down, so as to avoid breaking the bucket teeth due to excessive inclination. 3. Be careful not to swing the digging arm left and right under the condition of large resistance, so that the komatsu bucket teeth and tooth adapter are easily broken due to excessive force on the left and right sides, and the design of the force on the left and right is not considered.

Selection of kobelco bucket teeth: When purchasing bucket teeth for excavators, the first thing to look at is the working environment in which the bucket teeth are used to determine what type of kobelco bucket teeth. First, generally dig soil, loose sand, etc. with flat kobelco bucket teeth. Secondly, RC-type bucket teeth are used for digging massive hard rock, and TL-type kobelco bucket teeth are generally used for digging massive coal seams. In addition, in the actual operation process, most people like general-purpose RC bucket teeth. Kyushan recommends that you do not use RC type bucket teeth, it is best to use flat kobelco bucket teeth, because RC bucket teeth wear out after a period of time, increase the digging resistance and waste power, while the flat bucket teeth always maintain a sharp surface during the wear process, reducing the digging resistance, Save fuel.

Doosan excavator bucket teeth: 1. To protect the whole bucket, the bucket teeth are wear parts. Since the bucket wears a lot when shoveling soil and stones, the doosan excavator bucket teeth are added to protect the bucket. Just imagine what a bucket without bucket teeth would wear... 2. Make the operation more delicate. We drive the excavator to draw a dragon painting style on the ground. Imagine that the delicate operation cannot be achieved without the reference of doosan excavator bucket teeth. 3. Easy to dig and shovel. The doosan excavator bucket teeth are conical with a gap in the middle. The force of the entire bucket is smaller and the pressure becomes larger, making it easier to shovel and dig things up... 4. After digging hard things, it has a buffering effect on the whole machine, etc.